Weight Angel and Roof Angel can be used in conjunction with each other to create a non-penetrative horizontal lifeline.

To be classified as restraint, the position of the anchorage and cable systems, used with the correct length of the lanyard must ensure it is not possible to approach within 500mm of a roof edge or other opening where a fall risk is present.

This system is a restraint access line, but with each Weight Angel installed with a Thro Plate and D-Ring then each Weight Angel can be used as an individual fall arrest anchorage point.

Used with the RA-2012 Thro Plate and RA-2006 D Ring each anchor can be used as a fall arrest anchor when connected to the D Ring and not the cable. This allows the user to access in restraint the area where work is to be carried out and only then convert to fall arrest.

It is intended for use on flat roofs or where it is preferable that penetration of the roof surface be avoided.

---

Components

• Weight Angel
• Roof Angel

Materials

• Stainless Steel / Rubber / Galvanised Steel

Specifications

• Maximum Span 10m
• Maximum Users 2

Conformity

• •CE Approval EN 795:2012 Type E (Weight Angel)
• EN 795:2012 Type C (Roof Angel)
  • Roof Angel to be used as restraint ONLY
  • User must not be allowed to get within 0.5m of a fall risk
  • Must be installed by an approved Roof Angel installer
    
• BS 7883
• BS 8437:2005

Benefits

• Does not require the roof surface to be penetrated.
• ​Provides a continuous anchorage for users to access the work area
  

The Weight Angel can be used on any of the following roof surfaces in WET or DRY conditions:

• Single Ply Membrane
• Asphalt
• Concrete
• Stone Chippings (Brushed)
• Mineral Felt

click to enlarge

---

click to enlarge

click to enlarge